The Airconics ERV-P35B is a balanced pressure, heat recovery ventilation system for homes/areas up to 145m². Supplied with wall control panel and suitable for either stand-alone installation, or can be integrated with many ducted air conditioners.
By circulating fresh air throughout the home, you can not only remove moisture but also improve the quality of the air you breathe by reducing CO2 and fine particulate levels. This is a dual-filter model with both the washable pre-filter and HEPA H13 filter fitted as standard.
Our large resin core heat exchanger facilitates the efficient transfer of heat between the streams of stale/damp air being extracted from the home, and the incoming filtered, fresh air from outside.
The design of our appliances makes regular servicing straight-forward – simply un-latch and open the hinged front cover and you have immediate access to the filters and heat exchanger. Both the pre-filter and the resin core heat exchanger are durable and washable.
Backorder
$2510 RRP
Specifications
Airflow
350m³/h
Airflow
97 l/s
Heat Exchange Method
Passive, Balanced Pressure, Air-to-Air
Static Pressure
140Pa
Heat Exchange Efficiency (Enthalpy)
86-94%
Heat Exchange Core Type
Heat Exchanger Size
Permeable Resin (Washable)
aaa x bbb x hhh
Filters Included
Pre-Filter (Washable) & HEPA H13 Filter
Power Supply
AC, 230V, 50Hz
Rated Power
96W
Cables Included
- 3-pin plug
- Comms cable (6m length)
Max Area/Home Size *1
145m²
Max No. Outlets *2
x4
Max No. Extracts
x2
Max Duct to Furthest Outlet *2
12m
Max Duct to Furthest Extract
8m
Duct Connections *3
150mm
Weight
31.5kg
Noise (dB) *4
29dB
Control Options Included
- M3 Manual 3-Speed Switch
- WT1 Wall Control Thermostat
Dimensions
880mm (a) x 688mm (b) x 260mm (h)
*1 - Max Area/Home Size may be disregarded when working to a professional design that factors airflow, Pa and desired air changes
*2 - Max number of outlets and max duct to furthest outlet may be disregarded when integrated with an A/C and air supply to rooms is handled by the A/C.
*3 - ERV-P15B model with 120mm duct connection spigots can be increased to 150mm with reducer (not included) to allow connection of more common 150mm ducting.
*4 - dB readings are measured 1m from the appliance with no ducting connected. Actual in-home noise levels will be much lower when system is installed inside a ceiling cavity and sound is dampened by vibration isolating mounting brackets (recommended), a standard plasterboard ceiling and batts insulation. Typically "near silent" or "quieter than your fridge" results can be achieved.